ELECOM PoE Injector, Gigabit Compatible, 3 Ports, EIB-UG01-PF2

Number of Ports: 2 (Data/Data+PoE) Connection Method: 1000BASE-T/100BASE-TX/10BASE-T Network Type: IEEE802.3ab/IEEE802.3u/IEEE802.3 PoE Specification: 802.3af Compliant Number of PoE Ports: 1 PoE Power Supply Capacity: 15.4W (Maximum) Operating Environment: Temperature: 0°C to 50°C, Humidity: 10% to 90% (non-condensing) Storage Environment: Temperature: -20°C to 70°C, Humidity: 5% to 90% (non-condensing) Connector Type: RJ-45 x 2 (Input/Output Pair) Installation Orientation: None Cooling Fan: None Housing Material (Color): Steel (Black) Input Voltage: AC 100-240V 50/60Hz Power Consumption (Rated): 18.2W (Maximum) Dimensions (W x D x H): Approx. 154 x 73.1 x 36mm (Main Unit Only) Weight: Approx. 410g (Main Unit Only) Wall Mounting Holes: Yes Warranty: 3 Years Compliance: EU RoHS Compliant Standards: VCCI Class B Accessories: 1 x Dedicated AC Power Cable (3-pin, approx. 1.8m), 1 x 3-pin to 2-pin Adapter, 1 x AC Cable Strap, 4 x Rubber Feet, 2 x Wall Mounting Screws, 1 x Safety Instructions Sheet, 1 x Setup Guide, 2 x Serial Number Stickers This IEEE802.3af-compliant PoE (Power over Ethernet) injector supplies power to PoE-enabled devices via LAN cables. Easily install PoE-enabled devices such as wireless access points, IP phones, and network cameras in locations without a nearby power source. By using electrolytic capacitors made by a Japanese manufacturer and a metal case, the unit is heat-resistant up to 50°C, ensuring stable operation even in the harsh environments of factories and near server racks. It can be wall-mounted using the included wall-mounting screws. Using the optional magnet (EHB-EX-MG4)*, it can also be installed on metal surfaces such as rack walls. *This product uses two of the four magnets included.