★【Cut Line】Thanks to the built-in prism, this motorcycle fog lamp has a clear upper cut line and a narrow vertical width of irradiation. In addition, the motorcycle fog amplifier LED illuminates a wide width, so it provides sufficient lighting for drivers while not causing inconvenience to pedestrians or corresponding vehicles. It is truly ideal as a motorcycle headlight auxiliary light!
★【Caution】In practice, when installing on a motorcycle, it is often necessary to hang the motorcycle fog lamp LED upside down or sideways. The internal prism of this motorcycle fog lamp is firmly fixed with waterproof silicone, and the LED circuit board is also fixed, so it seems that considerable knowledge is required to modify it. If you are a beginner, we recommend that you ask a professional. Please be careful about this point.
★【Squid Ring Fog Lamp】The LED Squid Ring for motorcycle fog lamps emits the main white light and also has an orange Squid Ring. When driving at night, the orange light stands out more in the white light, and even if only the Squid Ring is turned on during the day, it is less likely to be overlooked by pedestrians or other vehicles.
★【Switch included】In addition to the fittings required for installation, the motorcycle auxiliary light also comes with an on-on-off switch. The ON-ON-OFF switch has a three-wire design with black and white wires - ON1, black wire - ON2, and red wire - power input. The motorcycle auxiliary lamp LED also has a three-wire connection, with the yellow wire controlling the squid ring, the red wire controlling the auxiliary light, and the black wire exporting power. This allows the squid ring to light up in a single line and the main light to light up in a single line. With a little tinkering, you can also light up the squid ring in a single line and the squid ring + main light at the same time!
★[M6 bolt installed] The auto fog lamp is installed with an M6 screw and is compatible with 12V and 24V, so it can be used in a variety of places. For example, it can be attached to the front fork or bumper of a motorcycle as a motorcycle fog lamp or motorcycle sub-light, or used alongside the headlight as a motorcycle headlight auxiliary light. It can also be used as an auxiliary light for a Cub, a scooter, an ATV, a UTV, a bicycle, as a fog lamp or auxiliary light for a car, or to light the bed of a truck.
Product details
★[Aoling Motorcycle Fog Lamp LED Cut Line with Switch Motorcycle Headlight Auxiliary Light Motorcycle Fog Lamp Small Main White + Amber Squid Ring Motorcycle Fog Lamp 2 Pieces]
Material: Alloy + LED
Input voltage: DC12V-24V
Body color: Black
Main light color: White
Squid ring light color: Orange
Fixing screw diameter: M6
Product Features
★【Cut Line】Thanks to the built-in prism, this motorcycle fog lamp has a clear upper cut line and a narrow vertical width of irradiation. In addition, the horizontal width of the motorcycle fog amplifier LED is wide, so it provides sufficient lighting for drivers while not causing inconvenience to sidewalks or corresponding vehicles.
★【Caution】In practice, when installing on a motorcycle, it is often necessary to hang the motorcycle fog lamp LED upside down or sideways. The internal prism of this motorcycle fog lamp is firmly fixed with waterproof silicone, and the LED circuit board is also fixed, so it seems that considerable knowledge is required to modify it. If you are a beginner, we recommend that you ask a professional. Please be careful about this point.
★【Squid Ring Fog Lamp】The LED Squid Ring for motorcycle fog lamps emits the main white light and also has an orange Squid Ring. When driving at night, the orange light stands out more in the white light, and even if only the Squid Ring is turned on during the day, it is less likely to be overlooked by pedestrians or other vehicles.
★ [With switch] In addition to the hardware required for installation, the motorcycle auxiliary light is packaged with an on-on-off switch. The ONONOFF switch has a three-wire design: black and white wire 1--ON1, black wire 2--ON2, and red wire--power input. The motorcycle auxiliary lamp LED also has a three-wire connection, with the yellow wire controlling the squid ring, the red wire controlling the auxiliary light, and the black wire exporting power. Therefore, the wiring method is as follows:
① "ON1 turns on the squid ring, ON2 turns off the squid ring and only the main light turns on": Connect the yellow and red wires of the fog lamp to the black and white wires and black wires of the switch respectively. Then connect the black wire of the fog lamp to the negative pole of the power supply side and the red wire of the switch to the positive pole of the power supply side.
② "ON1 turns on the squid ring, ON2 turns on both the squid ring and main light at the same time": Add a branch wire to the yellow wire of the fog lamp, connect yellow wire 1 to the black and white wires of the switch, connect yellow wire 2 and the red wire together to the black wire of the switch, then connect the black wire of the fog lamp to the negative pole of the power supply, and the red wire of the switch to the positive pole of the power supply.
★[M6 bolts installed] The auto fog lamp is attached with M6 screws and is compatible with both 12V and 24V, so it can be used in a variety of places.
Note
1. We recommend that you check the lighting before installation. If there is an initial defect, please contact us immediately. For details, please go to [Account Service] - [Order History] - [Contact Seller].
2. This is a beginner's waterproofing project, but considering the service life, be sure to add caulking to any gaps such as around the lens and where the wiring origins.
