Insta360 Motorcycle Bundle Complete Mount Kit for Insta360 ONE Compatible with Insta360 ONE 360 EVO and All GoPro Cameras - X3/X2/X R/RS Camera,

---------------------------------------------------------------------- 【Cautions for using electrical products】 When using electrical appliances, please note that the voltage is different from that of Japan, which may cause malfunctions. Since the plug type is Japan type(A or B type), please check the voltage and use a transformer. Please note that a transformer is different from a conversion adapter. We are not responsible for malfunctions caused by use without a transformer.

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ----------------------------------------------------------------------

✔ COMPLETE INSTALLATION KIT: The Insta360 Motorcycle Bundle is a complete solution for mounting your Insta360 ONE R/RS or ONE X3/X2/X camera on your motorcycle or helmet. This kit includes several peel and stick 3M adhesive mounting stickers that allow you to mount your camera to any smooth, flat surface on your bike - front or rear fender, gas tank, etc. ✔ Attach to Helmet: Add a camera mount to your bike helmet using the included 3M adhesive mount. The adhesive mount is slightly curved to match the curves of most motorcycle helmets. For best results, we recommend applying the adhesive mount to the top or side of your helmet. ✔ MOUNT TO YOUR BIKE: The included handlebar clamp allows you to mount the camera to most standard size bike bars from 17mm to 30mm (0.66" to 1.2") in diameter. You can mount your camera by using small or large bar clamp spacers. The handlebar clamp has a 360 degree adjustable base, allowing you to position your camera in almost any direction. ✔ 360 Video Compatibility: This installation kit is fully compatible with Insta360 ONE R, Insta360 ONE X, and Insta360 EVO camera models. This mounting kit is compatible with all GoPro cameras and the GoPro mount ecosystem. ✔ Package Contents: 1 x Handlebar Clamp, 2 x CNC Extension Rods, 2 x Adhesive Mounts, 4 x 3M Mount Stickers, 4 x Mount Base Buckles, 6 x 1/4-20'' Camera Mount Adapters, 6 x M5 Thumb Screws , 4 x M5 Diameter Stabilizing Washers, 1 x Thumb Screw Wrench, 2 x Rubber Spacers, EVO Gimbal Microfiber. 1 cleaning cloth Insta360 Motorcycle Bundle Mount Kit. Insta360 Motorcycle Bundle is a complete solution for mounting your Insta360 ONE X3/X2/X or ONE R/RS camera on your motorcycle or helmet. This kit includes several peel and stick 3M adhesive mounting stickers that allow you to mount your camera on any smooth, flat surface on your bike, such as the front fender, rear fender, or gas tank. The included handlebar clamp accommodates bar sizes from 17mm to 30mm (0.65" to 1.25") in diameter using small or large bar clamp spacers. The handlebar clamp features a 360 degree adjustable base that allows you to position your camera in almost any direction. Additionally, (2) the mounting base can be used with the included peel-and-stick 3M adhesive sticker (24 hour cure) and can be attached to a helmet or bicycle with a removable base buckle mount. Install (1) or (2) CNC aluminum extension rods between the camera and the mount base buckle Use two to move the camera away from the bike. By mounting the camera away from the bike, you can take shots similar to an invisible selfie stick, with a "drone" following effect. CNC extension rods are specially sized to not interfere with 360 video stitch lines. Note: To maximize the stability of the extension rod, please use the included M5 plastic lock washer. Compatible cameras: Insta360 ONE R Insta360 ONE X Insta360 EVO All GoPro cameras and GoPro ecosystem. Package Content: 1 x Handlebar Clamp 2 x CNC extension rods Adhesive mount x 2 4 x 3M mount stickers Mounting base buckle x 4 6 x 1/4~20 inch camera mount adapters 6 x M5 Thumbscrews 4 x M5 Diameter Stabilizing Washers 1 x Thumbscrew Wrench 2 x Rubber Spacers 1 x EVO Gimbals Microfiber Cleaning Cloth