Voice Control Wood Digital Alarm Clock TEMP Humidity Date Night Mode Table Clock 3 Alarms Power Outage Memory 12/24H LED Clock

Function

1. 12/24H ℃/℉ Switching ℃/℉:Press "UP" key to switch ℃/℉

2. Display Mode Switching

Time Display---Press “SET” key---dP-1 display---Press “SET” key--dP-2 display

dP-1:Time+TEMP display for 10s---Year Month and Date display for 5s---Cyclic display dP-2:Always Time+TEMP display

3. Three Sets of Alarms Workday alarm settings ON:E--Everyday Alarm --：E---Workday Alarm

4.Brightness Adjustment 3 level Manual Brightness Adjustment L1:Brightest,L2:Medium,L3:Darkest Default brightness is L1，press and hold “UP” key,then press “DOWN” key to adjust brightness

5.Saving Mode Saving Mode：Press “DOWN” key---"--Sd"--Press"DOWN" key---"onSd"---Screen will be off in 5-10s

6. Voice-activated Function Voice control works when saving mode("onSd") When the sound of clapping or tapping the table is greater than 90 dB, it can wake up the screen to light up for 10s "--Sd":Screen will be always on if USB Powered(Plug Not Included)

7.Power Outage Memory Function Unscrew the 2 screws with a screwdriver, putting CR2032 battery (Battery Not Included) and Tighten the screws. CR2032 Battery (Not Included)only for Power-off memory,no need to set time again if power cut. Clock can not be powered by CR2032 Battery(Not Included)

8.Night Mode 18:00-6:59 Brightness automatically enters low brightness mode Night Mode can not be turn off,it is default setting

Product Show

Color:As picture show Input Voltage : 5V 0.5A or 5V 1A Size : 15*7*4cm/5.9*2.76*1.57in

Package：1xWooden Alarm Clock 1xInstruction 1x100cm USB Cable

Note:Voice control works when saving mode("onSd") When the sound of clapping or tapping the table is greater than 90 decibels, it can wake up the screen to light up for 10s "--Sd":Screen will be always on if USB Powered(Plug Not Included)

Saving Mode：Press “DOWN” key---"--Sd"--Press"DOWN" key---"onSd"---Screen will be off in 5-10s