Feature:
1. [Disassembled Filter] The solenoid valve filter can be disassembled and cleaned when it is clogged, which is easy to use, so you can use it with confidence.
2. [Manual Switch] The manual switch design is suitable for any crowd, easy and stress free, which is suitable for water, liquid, gas, agricultural water, liquid fertilizer, etc.
3. [Water Outlet Direction] Know the water outlet direction according to the water outlet direction indication on the valve body, to meet your various need.
4. [Durable Material] Irrigation timer solenoid valve is made of high quality nylon PA66, stainless steel material, durable, safe and can be used for a long time.
5. [Widely Application] This timer solenoid valve is widely used in many situations, such as courtyards, balconies, family green wall, outdoor garden, etc.
Specification:
Item Type: Irrigation Solenoid Valve
Material: Nylon PA66, stainless steel
Product Size: Approx. 13 x 11.5 cm / 5.1 x 4.5 in
Thread: G1 internal thread
Rated Voltage: DC6V
Use Voltage: DC3V-9V
Coil Resistance: 9 Ohm +/-5percent
Switch Form: Positive pulse to open the valve, negative pulse to close the valve
Pulse Width: 30-ms
Working Pressure: 0.02-0.8Mpa
Working Medium: Liquid, water, gas, light oil (stickiness less than 20cst)
Medium Temperature: 0-70 celsius
Ambient Temperature: -10~50 celsius
Service Life: 500,000 times
Response Time: less than 0.01s
Electric Strength: 1500v, 50Hz, 1mim
Insulation Performance: more than 100m ohm
Waterproof Grade: IP68
Sealing Material: rubber (VITO)
Body Material: Reinforced Nylon PA66
Applicable Places: Public green space, home gardening, agricultural production, garden gardening production, farms, greenhouses, greenhouses, gardens, parks
Application: Automatic control products for courtyards, balconies, family green wall, three dimensional greening micro sprays, droppers, and infiltration irrigation
Uses: Suitable for on off switching of media such as water, liquid, gas, agricultural water, diluted pesticides, liquid fertilizer, to achieve automatic control
Weight: Approx. 432g / 15.2oz
.
Package List:
1 x Chinese And English Manual
1 x Solenoid Valve
Note:
1. The perfect installation of the solenoid valve is to have the coil facing upwards and maintain a vertical position. When conditions do not allow, it is allowed to tilt +/-35 degrees .2. The parameters of the solenoid valve should be consistent with the use requirements, and the arrows on the solenoid valve should be consistent with the flowing direction of the pipeline.3. This valve is not equipped with explosion proof device, so it cannot be used in explosive dangerous places.4. The installation is to wrap several circles of material tape on the connecting pipe. When connecting, the connecting pipe has a thread distance of 8?9mm outside the valve. Do not screw in too much. If the screwing in too deep or the screwing force is too large, the valve body will be damaged. .5. When the flowing adjustment bolts rotates clockwise, the flowing decreases; when it rotates counterclockwise, the flowing increases.6. Check and clean the filter, the water inlet should be closed, and the pressure should be reduced before proceeding.7. If the solenoid valve still cannot shut off the water when the solenoid valve is closed, please unscrew the cleaning knob to clean the filter screen. If the problem still exists, please open the stainless steel seats of the solenoid valve and use a small needle to unblock the 3 small round holes inside (due to the alkali Water is easy to crystallize into calcium carbonate, or dirt blocks the pores)8. If the water still does not flowing out when the solenoid valve is opened, just unblock the 3 small holes of the stainless steel seats of the solenoid valve.
