Feature:
1. Standard H.264: Low bit rate; High-quality images; Strong fault tolerance; Strong network adaptability.
2. Support remote monitoring, remote viewing, two-way voice intercom, echo cancellation, noise suppression.
3. Support compatible for Android, IOS intelligent terminal remote real-time monitoring.
4. Single light source night vision lighting (night vision distance 6 meters), infrared light fill light, to achieve night vision image effect.
5. Built-in rechargeable lithium battery, long battery life, up to 2 months in normal operation and 12 months in standby time.
6. Support 2.4G Wi-Fi (IEEE802.11b/g/n).
7. Support micro SD card (up to 128GB) storage, mobile phone video.
8. Support point-to-point short-range connection distribution network.
9. Support human body detection, intelligent push.
10. Detachable base with non-slip pad attached to the base.
Description:
Name: Robot Camera
SOC: Insignia T31
DDR: 64M Bytes
Sensor: 1/2.9 color CMOS sensor
IR-CUT: Color Black and White Switcher
Lens: M12 f3.7MM F.2.0 2OOW
Viewing angle: H (horizontal) 89 degrees; V vertical 52 degrees: D diagonal 108 degrees
Minimum illumination: 0.01Lux
Input/Output: Two-way voice intercom (built-in microphone and speaker)
Audio compression method: G711A
Video compression method: H.264
Lighting frequency: 50Hz
Image frame rate: 20ps
Maximum image resolution: 1920x1080P
Night vision light source: 14mil infrared light (940nM wavelength), illumination distance: 6 meters
Wireless network: 2.4G Wi-Fi (IEEE802.11b/g/n), built-in antenna
Supported protocols: TCP/IP, UDP/IP, DHCP
Support IP address: support wireless wifi, dynamic IP address
Human body detection: support human body detection (4-5 meters), intelligent push, remote wake-up
Alarm notification: mobile APP message push
Wake-up method: PIR human body induction wake-up, remote active wake-up
Recording method: alarm trigger, manual recording, all-day recording
Video storage: local Micro SD card, mobile phone memory
LED indication: RGB tri-color light, power/point-to-point mode/remote mode
Capacity: 3000mah
Detachability: arm, base are detachable
Use time: 2 months (depending on the wake-up situation)
Standby time: 1 year (varies according to usage)
Charging voltage: DV 5V+-5%/2A
Charging time: within 6 hours
Protection method: overcurrent/overdischarge/overcharge/short circuit/high and low temperature charging protection
Standby power consumption: (3.7V 0.18mA)
Working power consumption during the day: (3.7V 230mA)
Working power consumption at night: (3.7V 400mA)
Power supply: Type-C interface
SD card: 1 Micro SD card (up to 128GB) (SD card not included, need to be purchased separately)
Buttons: 1 reset button, 1 switch button
According to the installation method: flat lay
Dustproof and waterproof: not waterproof
Working environment: -10° - 45°C /0% - 80% (no condensation)
Storage environment: -20°C - 60° /0% - 90% (non-condensing)
Dimensions (LxWxH): Body: 18cm (H) x 15cm (L) x 9cm (W) Base size: Φ 8.5CM
Material: ABS
Packing list:
Robot Camera x 1
Charging Line x 1
Instructions x 1
Note:
1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.
