Universal Motorcycle Heated Grips with Temperature 3 Temperature Switch Compatible with Millibar Built-in Control, Settings, Included, 22.2mm








תיאור
Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. [Product name] ■Temperature-controlled grip heater [Product Description] ■This fast-heating grip heater is a must-have during cold weather. ■It has three temperature settings: 40°C, 50°C, and 60°C. ■The grips feature a stylish design and soft, high-quality rubber with a matte finish. ■The built-in temperature control chip allows for rapid heating in standby mode (flashing red), then automatically maintains the temperature at approximately 50°C (solid blue). ■The end caps are removable, so they can be used with bar end mirrors and caps. ■Includes a convenient switch bracket for use with mirrors and other accessories. ■Includes a fuse coupler cover for peace of mind in rainy weather or in the unlikely event of an accident. [How to use] ■ Press and hold the power button for about 3 seconds to enter standby mode. ■ From standby mode, press the power button briefly to switch to blue light (normal mode). ■ In normal mode, the light will switch between blue, green, and red each time you briefly press the power button, so set it to your liking. ■ When the device is on, press and hold the power button for about 3 seconds to turn it off (turn off the light). [Temperature setting] ■Red light (high temperature): 60℃ ■Blue light (medium temperature): 50℃ ■Green light (low temperature): 40℃ [Product Details] ■Grip inner diameter: 22.2mm ■Input voltage: DC12V ■Output wattage: Low temperature 17W, medium temperature 25W, high temperature 35W ■Included fuse: 7.5A ■Grip length (excluding end caps) Left/Right: Approximately 120mm [Installation] ■All you have to do is swap the grips and connect the + and -, so even amateurs can easily install it. [Notes] ■There is no warranty or instruction manual. ■It cannot be installed on a 6V or 6V vehicle. Product name ■Temperature-controlled grip heater Product Description ■This is a fast-heating grip heater that is a must-have during cold seasons. ■The temperature can be adjusted to three levels: 40 degrees, 50 degrees, and 60 degrees. ■The grip has a stylish design and is made of high-quality, soft, matte rubber. ■With a built-in temperature control chip, it heats up quickly in standby mode (flashing red) and then automatically maintains the temperature at approximately 50°C (solid blue). ■The end caps can be removed, so it can also be used with bar end mirrors, bar end caps, etc. ■Comes with a convenient switch bracket that can be fastened to mirrors, etc. ■ Comes with a fuse coupler cover for peace of mind in case of rain or any unexpected trouble. How to operate ■Press and hold the power button for about 3 seconds to enter standby mode. ■From standby mode, briefly press the power button to switch to blue light (normal mode). ■In normal mode, the light will switch between blue, green, and red each time you briefly press the power button, so please set it to your liking. ■When the light is on, press and hold the power button for about 3 seconds to turn it off (turn off the light). Temperature settings ■Red light (high temperature): 60℃ Blue light (medium temperature): 50°C ■ Green light (low temperature): 40℃ Product details ■Grip inner diameter: 22.2mm ■ Input voltage: DC12V Output wattage: Low temperature 17W / Medium temperature 25W / High temperature 35W ■Included fuse: 7.5A ■ Grip length (excluding end caps) ・Left/Right: Approx. 120mm Installation ■All you have to do is swap the grips and connect the + and -, so even amateurs can easily install it. Precautions ■There is no warranty or instruction manual. ■Cannot be installed on non-electric vehicles or 6V vehicles.



























